Titanium Flat Washers.
Stamping.

For standard metric thread size.

These components are manufactured in Ti-6Al-4V Titanium alloy
is usually reserved for aerospace applications.

These components will give about a 40% weight reduction
when compared with steel.

Ti-6Al-4V (also known as Gr 5) has fantastic corrosion resistance
and will look stay looking good for its entire lifetime.

…………………………………………………………………………………………..

DIN125 Standard Size                                                                                                       Unit: mm
	h			d				D
Thread Size				Inside diameter				Outside diameter
	Nom	Max	Min	Nom.(Min)	Max			Nom.(Max)	Min
M3	0.5	0.55	0.45	3.2	3.38			7	6.64
M4	0.8	0.9	0.7	4.3	4.48			9	8.64
M5	1	1.1	0.9	5.3	5.48			10	9.64
M6	1.6	1.8	1.4	6.4	6.62			12	11.57
M7	1.6	1.8	1.4	7.4	7.62			14	13.57
M8	1.6	1.8	1.4	8.4	8.62			16	15.57
M10	2	2.2	1.8	10.5	10.77			20	19.48
M12	2.5	2.7	2.3	13	13.27			24	23.48
M14	2.5	2.7	2.3	15	15.27			28	27.48
M16	3	3.3	2.7	17	17.27			30	29.48
M18	3	3.3	2.7	19	19.33			34	33.38
M20	3	3.3	2.7	21	21.33			37	36.38
M22	3	3.3	2.7	23	23.33			39	38.38
M24	4	4.3	3.7	25	25.33			44	43.38
M27	4	4.3	3.7	28	28.33			50	49.38
M30	4	4.3	3.7	31	31.39			56	55.26
M33	5	5.6	4.4	34	34.62			60	58.8
M36	5	5.6	4.4	37	37.62			66	64.8