Flat Washers
Titanium Flat Washers.
Stamping.
For standard metric thread size.
These components are manufactured in Ti-6Al-4V Titanium alloy
is usually reserved for aerospace applications.
These components will give about a 40% weight reduction
when compared with steel.
Ti-6Al-4V (also known as Gr 5) has fantastic corrosion resistance
and will look stay looking good for its entire lifetime.
…………………………………………………………………………………………..
DIN125 Standard Size Unit: mm |
|||||||||
h | d | D | |||||||
Thread Size | Inside diameter | Outside diameter | |||||||
Nom | Max | Min | Nom.(Min) | Max | Nom.(Max) | Min | |||
M3 | 0.5 | 0.55 | 0.45 | 3.2 | 3.38 | 7 | 6.64 | ||
M4 | 0.8 | 0.9 | 0.7 | 4.3 | 4.48 | 9 | 8.64 | ||
M5 | 1 | 1.1 | 0.9 | 5.3 | 5.48 | 10 | 9.64 | ||
M6 | 1.6 | 1.8 | 1.4 | 6.4 | 6.62 | 12 | 11.57 | ||
M7 | 1.6 | 1.8 | 1.4 | 7.4 | 7.62 | 14 | 13.57 | ||
M8 | 1.6 | 1.8 | 1.4 | 8.4 | 8.62 | 16 | 15.57 | ||
M10 | 2 | 2.2 | 1.8 | 10.5 | 10.77 | 20 | 19.48 | ||
M12 | 2.5 | 2.7 | 2.3 | 13 | 13.27 | 24 | 23.48 | ||
M14 | 2.5 | 2.7 | 2.3 | 15 | 15.27 | 28 | 27.48 | ||
M16 | 3 | 3.3 | 2.7 | 17 | 17.27 | 30 | 29.48 | ||
M18 | 3 | 3.3 | 2.7 | 19 | 19.33 | 34 | 33.38 | ||
M20 | 3 | 3.3 | 2.7 | 21 | 21.33 | 37 | 36.38 | ||
M22 | 3 | 3.3 | 2.7 | 23 | 23.33 | 39 | 38.38 | ||
M24 | 4 | 4.3 | 3.7 | 25 | 25.33 | 44 | 43.38 | ||
M27 | 4 | 4.3 | 3.7 | 28 | 28.33 | 50 | 49.38 | ||
M30 | 4 | 4.3 | 3.7 | 31 | 31.39 | 56 | 55.26 | ||
M33 | 5 | 5.6 | 4.4 | 34 | 34.62 | 60 | 58.8 | ||
M36 | 5 | 5.6 | 4.4 | 37 | 37.62 | 66 | 64.8 |
LAST: Hexagon Flange Nylon Lock Nuts
NEXT: Spring Lock Washers